Product ID:PRISMA TINTS MATERIAL
MSDS Date:11/17/1987
FSC:6520
NIIN:01-275-7351
MSDS Number: BWMVD

Emergency Phone: 302-422-4511

Info Phone: 302-422-4511/800-532-2855

Cage: 11107

Telephone: 302-422-4511/ 703-451-1900

Cage: 11107

NON HAZARDOUS INGREDIENTS

Fraction By Weight: 100%

Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PERSONS SUSCEPTIBLE TO METHACRYLATES
OR POLYURETHANES MAY SHOW SLIGHT DERMAL IRRITATION.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:SLIGHT DERMAL REDNESS OR IRRITATION.
Medical Cond Aggravated by Exposure:SKIN ALLERGIES TO METHACRYLATES AND
POLYURETHANES.

First Aid:SKIN-DICONTINUE USE. WASH SKIN WITH SOAP & WATER. CONSULT A
PHYSICIAN IF NECESSARY. EYES-FLUSH WITH WATER FOR 10 MINUTES.
CONSULT A PHYSICIAN. INGESTED-CONSULT A PHYSICIAN.

Extinguishing Media:SAND, CARBON DIXOIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING INCLUDING
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DURING A FIRE IRRITATING GASES MAY BE
PRESENT.

Spill Release Procedures:SPREAD SAND OR VERMICULITE ON SPILLED MATERIAL
TO ABSORB & THEN SCOOP UP & DISCARD IN MARKED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM FOOD & BEVERAGES.
AVOID HEAT & LIGHT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE NORMALLY REQUIRED.
Ventilation:NONE NORMALLY REQUIRED.
Protective Gloves:NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

HCC:N1
Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BRIGHT COLORED LIQUID; SWEET ACRYLATE ODOR.

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:DO NOT EXPOSE TO STRONG VISIBLE LIGHT.
Conditions to Avoid Polymerization:STRONG VISIBLE LIGHT ON MATERIAL.

Waste Disposal Methods:WASTE MAY BE DISPOSED OF IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.